Gypsum tiles must be laid correctly, as not only the aesthetic look of cosmetic facing, but in addition the service quality of
this material will rely on the engineering of work. The product is more universal, and it can be connected to concrete, plaster,
brick or gypsum board sheets, provided that the top layer of the foundation is and has no flaws.
In the event the defects of the base are important, it ought to be completely treated with primer, then a cement mortar is made,
which satisfies all the cracks. Then the surface should be repeatedly primed and dried. In cases like this, its makeup should
select a particular, containing elements which stop the look masterfasada.ru of fungus and mold.
In today’s interior of these rooms most often used gypsum tiles, imitating natural stone or brick. To perform cosmetic finishing
your self, it’s necessary firstly to select a strategy of tile positioning and prepare a remedy. It’s very important to focus on
the reverse side of the substance. When its surface has an embossed surface, then the glue should be put with an even trowel, and
if it’s even, then with a notched one.
The tech of this job is as follows:
* A thin layer of adhesive is put on the pre-prepared wall. It’s spread over the bottom so it is likely to place 4-5 tiles.
Decorative cladding can be put both on plasterboard, also on putty.
* Cover the back side of these tiles with adhesive.
* Plaster elements are pushed against the wall and their location is corrected. To align with the seams, it’s suggested to use
* Finishing is performed in rows, each of which should be changed by half of a tile. Facing is carried out into the corners of
this room, and then immediately eliminate any residual mortar in the joints.
Drying the walls takes no more than a day and needs a continuous humidity and temperature in the room. The last point in the
placing of gypsum tiles is their decor. To do this, the joints between these components are filled with a particular solution, the
color of which matches the brick.
Cosmetic fake of brickwork on the walls is carried out in the following manners:
* Cutting the surface of the pits of masonry using a bolt cutter along with your own hands;
* laying of tiles under the brick:
* imitating the format and colour of the side surface of one brick;
* Imitating a fragment of brickwork of many bricks.
The best approach to decorate»beneath the brick» will be the one that allows you to create a practical coating with the utmost
look of its similarity to natural masonry. All three methods to conduct this sort of finishing works fulfill the needs, but the
cutting edge of joints with a bolt is more labor-intensive and the formation of large amounts of dust, so let’s consider more
The old finish is removed from the walls, and the surface, if necessary, is leveled to eliminate the need to glue plaster on a
thick layer of glue.
Combining these cladding with other types of interior finishes can be both systematic and done with no clear consequences,
chaotically, with imitation of signs of aging.
With the help of decorative gypsum tiles it’s possible to imitate a lot of textures.
A lot of textures may be imitated with the support of decorative gypsum tiles.
The wall on which it’s to be set up should possess the following characteristics:
* Hardness and intensity of the surface;
* The absence of irregular areas and sharp gaps;
* no deformations.
Decorative tiles in the interior of the kitchen
Walls are created from a number of substances, so let us break down the principles of setup.
When dealing with concrete, there will not be any big problems. It is only necessary to take into consideration the porosity of
the material. Concrete, which has almost no pronounced pores, ought to be treated with a great primer.
Mounting gypsum tiles concrete
Before starting work on the setup of gypsum tiles on the walls, it’s well worth checking the strength of this surface. When the
plaster does not fall off the wall and in the identical time holds nicely, it is possible to simply paint it using primer.
Mount the tiles onto the painted concrete should not. The surface ought to be scratched, ensuring to misfire, and it needs to be
grouted and covered with a layer of plaster.